Shop
Showing 1156–1170 of 1459 results
-
Specialty Microscopes
SMDRILLCHEK4
Features:
- Focusing from +2 to -2 Diopter with a smooth helicoid focus mechanism
- High-resolution achromatic color corrected lens
- Anodized aluminum construction
- Soft rubber eyepiece
- Reticule with measuring scale
- Holds .125″ (3.18mm) shank drills
- No need to remove depth settings rings to inspect drills
- Horizontal mount for checking flute, margin, and relief
- Vertical mount for checking geometry and surface finish
SKU: SP007 -
Abrasives
Softback Sanding Sponge, 4 1/2 inch x 5 1/2 inch, Fine, 02604
M™ Softback Sanding Sponges are coated with aluminum oxide mineral. Each grade uses a range of mineral sizes. Fine ranges from grade 320 to 400.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
SKU: AB008 -
Equipment: Systems
Solder Mask System- 2 operator
2 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ109 -
Equipment: Systems
Solder Mask System- 3 operator
3 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ110 -
Equipment: Systems
Solder Mask System- 4 operator
4 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ111 -
-
Masking and Duct Tapes
Specialty High Temperature Masking Tape 501+
3M™ High Temperature Masking Tape 501+ is our premium high performance crepe paper masking tape designed to create super-sharp paint lines in most industrial painting situations, including high-temperature bake cycles of up to 300ºF for 30 minutes, and provide clean, one piece removal.
SKU: CBA010 -
Equipment: Valves
Spool Valve
The Spool valve is designed for high pressure applications and high viscosity materials up to 300,000cps. You can control the valve with the JGD500S for low to medium viscosity materials. For dispensing heavier materials use the JGD500S-DS which uses dual actuation to open and close the valve. Suggested materials are RTV’s, silicones, greases, and solder masks.
SKU: FDJ104 -
Aerosol Adhesives
Spray Adhesive for Styrofoam® Brand Foam
3M™ Spray Adhesive for Styrofoam® Brand Foam is excellent for bonding Styrofoam to itself and to other materials, such as fabrics, ribbons, silk flowers, cardboard, paper, sequins and wood. It’s an easy-to-use substitute for silicone adhesives, white glues, hot-melt adhesives, tapes and pins. The fast-drying formula bonds permanently.
SKU: AE044 -
Equipment: Valves
Spray Valve
The Spray valve is pneumatically actuated and use air pressure to dispense low to medium viscosity materials such as lubricants, solvents, inks, and conformal coatings. You can regulate the amount of material dispensed by fine tuning the stroke adjustment knob.
SKU: FDJ105 -
Packaging Tapes & Equipment
Stainless Steel Casters
Stainless Steel Casters3M-Matic™ Stainless Steel Casters feature stainless steel heavy duty construction. Locking/swivel design for easily moving 3M-Matic™ Stainless Steel Case Sealers.
- Stainless steel construction.
- Easy bolt on attachment to stainless steel case sealer.
- Consistent quality tape application
SKU: PTE014 -
3M
Strapping Tape
Scotch® 8898 Strapping Tape
Cleanly removes and resists stains on some surfaces, such as metal
Patented 3M pressure-sensitive synthetic rubber adhesive is specifically formulated to adhere evenly and adhere firmly for a long-lasting hold
Heavy-duty film reinforcement resists tearing, abrasion, moisture and scratches and includes adequate rigidity for manual or semi-automatic dispensing
SKU: 70006304383
