3M
Showing 181–195 of 986 resultsSorted by price: high to low
-
Epoxy Structural Adhesives
Epoxy Adhesive 2086 Gray
3M™ Scotch-Weld™ Epoxy Adhesive 2086 is an exceptionally high strength heat curing epoxy that provides higher impact, peel and bond strength than normally attainable with epoxy based adhesives. The paste viscosity of this adhesive allows use on vertical surfaces without run-off during the cure cycle.
SKU: AES005 -
Epoxy Structural Adhesives
Epoxy Adhesive 2290
3M™ Scotch-Weld™ Epoxy Adhesive 2290 is a solvent-based, low viscosity amber tinted thermosetting epoxy adhesive requiring heat cure. It is designed for metal to metal coating and subsequent bonding: for example, in motor lamination and wire winding.
SKU: AES004 -
Epoxy Structural Adhesives
Epoxy Adhesive 1386
3M™ Scotch-Weld™ Epoxy Adhesive 1386 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at service temperatures from -70°F to 250°F (-57ºC to 121ºC). This cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
SKU: AES003 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Non-Metallic Filled
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled contains no aluminum powders and cures to a cream-color (not gray). This adhesive is designed to provide high strength, high temperature resistance and smooth bond lines. It features slightly lower thermal conductivity than other 2214 epoxies, with higher dielectric strength.
SKU: AES002 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Hi-Density/Regular
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Density/Regular are designed to provide high strength, higher temperature resistance and smooth bond lines. One part, 250ºF (121ºC) curing, 100% solids, these high performance adhesives are designed for bonding metals and many high temperature plastics such as fiberglass reinforced plastic, polyester and phenolics.
SKU: AES001 -
Acrylic Adhesives
Structural Plastic Adhesive DP8010NS
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
SKU: SAD013 -
Acrylic Adhesives
Acrylic Adhesive DP8410NS
3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag, toughed, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.
SKU: SAD012 -
Specialty
3M™ Lane Marking Applicator
3M™ Lane Marking Applicator M1 helps you apply safety tape to floors quickly, easily and perfectly. Our handy walk-behind tape dispenser is the easiest way to mark warehouse traffic lanes and hazard areas without crawling around on the floor. Use this accessory to dispense 3M™ Safety Stripe and Vinyl Tapes to help improve
SKU: STP253 -
Specialty
3M™ Repulpable Double Coated Splicing Tape 405
3M™ Repulpable Double Coated Splicing Tape 405 is a lightweight tissue coated on both sides with a light green repulpable adhesive. It is ideal for permanent, simple overlap splices on uncoated papers. The firm adhesive resists oozing and/or bleed through yet offers high shear strength.
SKU: STP249 -
