3M
Showing 796–810 of 986 resultsSorted by price: low to high
-
Specialty
3M™ Lane Marking Applicator
3M™ Lane Marking Applicator M1 helps you apply safety tape to floors quickly, easily and perfectly. Our handy walk-behind tape dispenser is the easiest way to mark warehouse traffic lanes and hazard areas without crawling around on the floor. Use this accessory to dispense 3M™ Safety Stripe and Vinyl Tapes to help improve
SKU: STP253 -
Acrylic Adhesives
Acrylic Adhesive DP8410NS
3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag, toughed, two-part acrylic adhesive. This toughened product provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.
SKU: SAD012 -
Acrylic Adhesives
Structural Plastic Adhesive DP8010NS
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
SKU: SAD013 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Hi-Density/Regular
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Density/Regular are designed to provide high strength, higher temperature resistance and smooth bond lines. One part, 250ºF (121ºC) curing, 100% solids, these high performance adhesives are designed for bonding metals and many high temperature plastics such as fiberglass reinforced plastic, polyester and phenolics.
SKU: AES001 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Non-Metallic Filled
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled contains no aluminum powders and cures to a cream-color (not gray). This adhesive is designed to provide high strength, high temperature resistance and smooth bond lines. It features slightly lower thermal conductivity than other 2214 epoxies, with higher dielectric strength.
SKU: AES002 -
Epoxy Structural Adhesives
Epoxy Adhesive 1386
3M™ Scotch-Weld™ Epoxy Adhesive 1386 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at service temperatures from -70°F to 250°F (-57ºC to 121ºC). This cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
SKU: AES003 -
Epoxy Structural Adhesives
Epoxy Adhesive 2290
3M™ Scotch-Weld™ Epoxy Adhesive 2290 is a solvent-based, low viscosity amber tinted thermosetting epoxy adhesive requiring heat cure. It is designed for metal to metal coating and subsequent bonding: for example, in motor lamination and wire winding.
SKU: AES004 -
Epoxy Structural Adhesives
Epoxy Adhesive 2086 Gray
3M™ Scotch-Weld™ Epoxy Adhesive 2086 is an exceptionally high strength heat curing epoxy that provides higher impact, peel and bond strength than normally attainable with epoxy based adhesives. The paste viscosity of this adhesive allows use on vertical surfaces without run-off during the cure cycle.
SKU: AES005 -
Epoxy Structural Adhesives
Epoxy Adhesive 1469
3M™ Scotch-Weld™ Epoxy Adhesive 1469 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at temperatures from -70°F to 300°F (-57°C to 149°C). This white to cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
SKU: AES006 -
Epoxy Structural Adhesives
Toughened Epoxy Adhesive LSB60
3M™ Scotch-Weld™ Toughened Epoxy Adhesive LSB60 is a high performance, two-part toughened epoxy adhesive that offers outstanding shear adhesion and very high durability. With a 90 minute work life and easy 1:1 mix ratio by weight or volume, this epoxy is often used for bulk application through meter mix dispensing equipment and the manufacture of large panel products including honeycomb panels.
SKU: AES007 -
Epoxy Structural Adhesives
Epoxy Adhesive 110 Translucent Part B
3M™ Scotch-Weld™ Epoxy Adhesive DP110 is a translucent (orange when dry), flexible, fast-setting, two-part epoxy adhesive that works well on a variety of substrates, including metals, ceramics, concrete, composites, wood and many plastics. Upon curing, final colors will vary from yellow to orange.
SKU: AES008 -
Epoxy Structural Adhesives
Epoxy Adhesive DP3501
3M™ Scotch-Weld™ Epoxy Adhesive DP3501 is a rigid, two-part epoxy adhesive that cures rapidly at room temperature. Delivering high shear strength, we designed this epoxy adhesive to excel in bonding metal, wood, most plastics and masonry products.
SKU: AES009
