Adhesives
Showing 91–105 of 373 results
-
Aerosol Adhesives
Drywall Corner Bead 61
3M™ Drywall Corner Bead 61 Spray Adhesive 3M™ Drywall Corner Bead 61 Spray Adhesive is an economical, contractor-grade aerosol adhesive that quickly bonds plastic corner beads to drywall. Its red tint helps in hard-to-see areas. And the adhesive grabs quickly, so corner beads can be joined without delay. Common Uses: * Attaching corner beads to drywall * Temporarily hanging polysheeting
SKU: AE039 -
Packaging Tapes & Equipment
Electric Water Activated Tape Dispenser
3M™ Electric Water Activated Tape Dispenser W200 is a tape dispenser designed for water-activated tape. We built this dispenser with a heated water reservoir that speeds tape activation and helps improve adhesion in cooler packaging areas. This product is easy to use, dispensing a pre-set length of water-activated tape at the push of a button.
SKU: PTE031 -
Epoxy Structural Adhesives
Epoxy Adhesive 110 Translucent Part A
3M™ Scotch-Weld™ Epoxy Adhesive DP110 is a translucent (orange when dry), flexible, fast-setting, two-part epoxy adhesive that works well on a variety of substrates, including metals, ceramics, concrete, composites, wood and many plastics. Upon curing, final colors will vary from yellow to orange.
SKU: AES016 -
Epoxy Structural Adhesives
Epoxy Adhesive 110 Translucent Part B
3M™ Scotch-Weld™ Epoxy Adhesive DP110 is a translucent (orange when dry), flexible, fast-setting, two-part epoxy adhesive that works well on a variety of substrates, including metals, ceramics, concrete, composites, wood and many plastics. Upon curing, final colors will vary from yellow to orange.
SKU: AES008 -
Epoxy Structural Adhesives
Epoxy Adhesive 1386
3M™ Scotch-Weld™ Epoxy Adhesive 1386 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at service temperatures from -70°F to 250°F (-57ºC to 121ºC). This cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
SKU: AES003 -
Epoxy Structural Adhesives
Epoxy Adhesive 1469
3M™ Scotch-Weld™ Epoxy Adhesive 1469 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at temperatures from -70°F to 300°F (-57°C to 149°C). This white to cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.
SKU: AES006 -
Epoxy Structural Adhesives
Epoxy Adhesive 1838L
3M™ Scotch-Weld™ Epoxy Adhesive 1838L is a two-part flowable translucent adhesive that offers rigid bonds and high shear strength. Developed as a strong solution, this epoxy adhesive provides the results needed for projects requiring a durable bond that can be applied to a wide variety of metals, woods and some plastics.
SKU: AES017 -
Epoxy Structural Adhesives
Epoxy Adhesive 2086 Gray
3M™ Scotch-Weld™ Epoxy Adhesive 2086 is an exceptionally high strength heat curing epoxy that provides higher impact, peel and bond strength than normally attainable with epoxy based adhesives. The paste viscosity of this adhesive allows use on vertical surfaces without run-off during the cure cycle.
SKU: AES005 -
Epoxy Structural Adhesives
Epoxy Adhesive 2158
3M™ Scotch-Weld™ Epoxy Adhesive 2158 is a multi-purpose, two-part epoxy adhesive that offers rigid bonds and high shear strength. This epoxy adhesive provides a durable bond that can be applied to a wide variety of metals, wood, concrete, and some plastics.
SKU: AES015 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Hi-Density/Regular
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Density/Regular are designed to provide high strength, higher temperature resistance and smooth bond lines. One part, 250ºF (121ºC) curing, 100% solids, these high performance adhesives are designed for bonding metals and many high temperature plastics such as fiberglass reinforced plastic, polyester and phenolics.
SKU: AES001 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Hi-Temp
3M™ Scotch-Weld™ Epoxy Adhesive 2214 products are designed to give you high strength, higher temperature resistance and smooth bond lines are required. These high performance adhesives are designed for bonding metals and some composites and are formulated as convenient, one-part, heat cured pastes that dispense easily for precise results.
SKU: ASH006 -
Epoxy Structural Adhesives
Epoxy Adhesive 2214 Non-Metallic Filled
3M™ Scotch-Weld™ Epoxy Adhesive 2214 Non-Metallic Filled contains no aluminum powders and cures to a cream-color (not gray). This adhesive is designed to provide high strength, high temperature resistance and smooth bond lines. It features slightly lower thermal conductivity than other 2214 epoxies, with higher dielectric strength.
SKU: AES002 -
Epoxy Structural Adhesives
Epoxy Adhesive 2216NS
3M™ Scotch-Weld Epoxy Adhesive 2216NS is a flexible, non-sag, two-part epoxy adhesive that cures at room temperature. It provides a high strength bond with both high shear and peel strength while remaining highly flexible, making it ideal for applications where vibration and thermal expansion and contraction are common. It also withstands very cold temperatures without becoming brittle.
SKU: AES010 -
Epoxy Structural Adhesives
Epoxy Adhesive 2290
3M™ Scotch-Weld™ Epoxy Adhesive 2290 is a solvent-based, low viscosity amber tinted thermosetting epoxy adhesive requiring heat cure. It is designed for metal to metal coating and subsequent bonding: for example, in motor lamination and wire winding.
SKU: AES004
