3M™ Purple Hookit™ File Sheet, 80 grade, 2 3/4 inches x 16 1/2 in, 01791
Uniquely blended mineral construction and tough E weight backing provides for a fast cutting, longer lasting abrasive. Excellent for stripping paint or sanding marine fairing compounds.
Uniquely blended mineral construction and tough E weight backing provides for a fast cutting, longer lasting abrasive. Excellent for stripping paint or sanding marine fairing compounds.
Related products
-
Abrasives
Softback Sanding Sponge, 4 1/2 inch x 5 1/2 inch, Fine, 02604
M™ Softback Sanding Sponges are coated with aluminum oxide mineral. Each grade uses a range of mineral sizes. Fine ranges from grade 320 to 400.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
SKU: AB008 -
Abrasives
Gold Disc, 00978, P220A
Use for fine edge smoothing and final sanding prior to laying the base coat. Suggested Hookit ™ support from 3M® low profile, 6-inch 05756 or 3M® Hookit ™ backing, 6-inch 05776 and soft back, 6-inch 05774.
- Hookit ™ Good Performance Abrasive Disc
- Finishing sanding step or rough beveling before priming.
- The backing pad N / P 05865 is recommended. Can be used with 3M® Random Orbital Sanders.
SKU: AB005 -
Abrasives
3M® Hookit® Gold Disc
3M® Hookit® Gold Disc, 01078, 6 “, P220A
It has 7 holes to achieve a sanding that does not produce dust. It is used for coarse edge smoothing. It can be used to perform the final step of jobs with filler. It is recommended for use with the NP 05865 disc backing.
- Non-dusting, good performance, Hookit® bonded abrasive disc.
- Finishing sanding step or rough roughing of edges before application.
- It is recommended for use with the NP 05865 disc backing. It can be used with 3M® rotoorbital sanders.
SKU: AB004 -
Abrasives
3M™ Hookit™ Gold Disc Dust Free 216U, 6 inch, P320 grit, 01075
3M™ Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.
For Featheredging and Primer Sanding (Grades 80 – 800)
These products are designed to provide productivity in a variey of applications from express repair to larger body repair. Use the coarser products for sanding and featheredging filler and putties, and the finer grades for further refinement and primer sanding. Six holes for dust-free sanding. Use for fine featheredging or the last sanding step before priming. Suggested backup pad 05856.SKU: AB016
