3M™ Hookit™ Finishing Film Disc, 6 inch, P1200 grit, 00968
Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad 05776 and Interface pad 05774.
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad 05776 and Interface pad 05774.
Related products
-
Abrasives
Gold Film File Sheet
3M™ Hookit™ Gold Film File Sheet, 120 grade, 2 3/4 inches x 16 in, 02473
3M™ Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting abrasives that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.
SKU: AB020 -
Abrasives
Gold Disc, 00978, P220A
Use for fine edge smoothing and final sanding prior to laying the base coat. Suggested Hookit ™ support from 3M® low profile, 6-inch 05756 or 3M® Hookit ™ backing, 6-inch 05776 and soft back, 6-inch 05774.
- Hookit ™ Good Performance Abrasive Disc
- Finishing sanding step or rough beveling before priming.
- The backing pad N / P 05865 is recommended. Can be used with 3M® Random Orbital Sanders.
SKU: AB005 -
Abrasives
3M™ Purple Clean Sanding Hookit™ 6 inch, P500 grit, 01810
What the power of 3M™ Purple Clean Sanding Discs can do for you:
- Extend disc life – More power to go the distance with discs that can last 2-3 times longer than traditional no-hole, 5-hole or 6-hole discs.
- Increase productivity – Longer-lasting discs improve productivity and the unique multi-hole disc pattern is designed for quicker changes because hole alignment is not required. You’ll see the difference in material consumption – and your bottom line.
- Clear out more dust with less disc loading – The spiral-patterned disc design features hundreds of holes to give dust a better escape route, moving more dust away from your finishing surface without loading the disc. Dust settles into the loops of the disc, and not in the air or on the disc surface.
- Improve cutting ability – Premium abrasives deliver consistent performance to get the job done … and done right.
- Simplify disc application – Discs utilize the 3M™ Hookit™ Attachment System for easy reuse.
SKU: AB024 -
Abrasives
3M® Hookit® Gold Disc
3M® Hookit® Gold Disc, 01078, 6 “, P220A
It has 7 holes to achieve a sanding that does not produce dust. It is used for coarse edge smoothing. It can be used to perform the final step of jobs with filler. It is recommended for use with the NP 05865 disc backing.
- Non-dusting, good performance, Hookit® bonded abrasive disc.
- Finishing sanding step or rough roughing of edges before application.
- It is recommended for use with the NP 05865 disc backing. It can be used with 3M® rotoorbital sanders.
SKU: AB004
