Green Corps™ abrasives consist of a blend of minerals that provides increased abrasive life and a faster cut rate when used on plastic filler. Green Corps™ abrasives are built on D and E weight backing to make them extremely durable for sanding paint, metal, or fiberglass. Open coat construction reduces loading on fresh filler.
Related products
-
Abrasives
3M™ Hookit™ Finishing Film Disc, 6 inch, P1500 grit, 00950
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.
Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.SKU: AB012 -
Abrasives
Abrasive Sponge MG 02606
The medium abrasive has a range ranging from 120 to 180 degrees. The flexible sponge tassel enables the user to sand difficult-to-reach areas such as headlight openings, around handles, door corners , etc. Helps remove finger marks and can be used wet or dry.
- Flexible sponge papers coated with abrasive material. Allow users to sand hard-to-reach areas. They help eliminate fingerprints. They can be used wet or dry.
- Allows users to sand hard-to-reach areas Helps remove fingerprints Can be used wet or dry
SKU: AB002
