Softback Sanding Sponge, 4 1/2 inch x 5 1/2 inch, Fine, 02604
M™ Softback Sanding Sponges are coated with aluminum oxide mineral. Each grade uses a range of mineral sizes. Fine ranges from grade 320 to 400.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
Compare
3M™ Softback Sanding Sponges are coated with aluminum oxide mineral. Each grade uses a range of mineral sizes. Fine ranges from grade 320 to 400.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
Related products
-
Abrasives
Clear Coat Sanding Disc, p1500 grit, 02088
3M™ Trizact™ Hookit™ Clear Coat Sanding Disc, 6 inch, p1500 grit, 02088
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Our exclusive abrasive provides a uniform and consistent finish.
SKU: AB023 -
Abrasives
M™ Hookit™ Gold Disc, 6 inch, P180C, 00979
3M™ Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.
SKU: AB022 -
Abrasives
3M™ Hookit™ Finishing Film Disc, 6 inch, P1500 grit, 00950
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.
Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.SKU: AB012 -
Abrasives
Abrasive Sponge MG 02606
The medium abrasive has a range ranging from 120 to 180 degrees. The flexible sponge tassel enables the user to sand difficult-to-reach areas such as headlight openings, around handles, door corners , etc. Helps remove finger marks and can be used wet or dry.
- Flexible sponge papers coated with abrasive material. Allow users to sand hard-to-reach areas. They help eliminate fingerprints. They can be used wet or dry.
- Allows users to sand hard-to-reach areas Helps remove fingerprints Can be used wet or dry
SKU: AB002
