High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Levels orange peel, dust nibs or paint runs in all types of automotive paints. Appropriate for light sanding on refinish lacquer. Suggested backup pad 05776 and Interface pad 05774.
Related products
-
Abrasives
Clear Coat Sanding Disc, p1500 grit, 02088
0 out of 5(0)3M™ Trizact™ Hookit™ Clear Coat Sanding Disc, 6 inch, p1500 grit, 02088
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Our exclusive abrasive provides a uniform and consistent finish.
SKU: AB023 -
Abrasives
Gold Disc, 00978, P220A
0 out of 5(0)Use for fine edge smoothing and final sanding prior to laying the base coat. Suggested Hookit ™ support from 3M® low profile, 6-inch 05756 or 3M® Hookit ™ backing, 6-inch 05776 and soft back, 6-inch 05774.
- Hookit ™ Good Performance Abrasive Disc
- Finishing sanding step or rough beveling before priming.
- The backing pad N / P 05865 is recommended. Can be used with 3M® Random Orbital Sanders.
SKU: AB005 -
Abrasives
3M™ Hookit™ Finishing Film Disc, 6 inch, P1500 grit, 00950
0 out of 5(0)High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.
Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.SKU: AB012 -
Abrasives
3M® Hookit® Gold Disc
0 out of 5(0)3M® Hookit® Gold Disc, 01078, 6 “, P220A
It has 7 holes to achieve a sanding that does not produce dust. It is used for coarse edge smoothing. It can be used to perform the final step of jobs with filler. It is recommended for use with the NP 05865 disc backing.
- Non-dusting, good performance, Hookit® bonded abrasive disc.
- Finishing sanding step or rough roughing of edges before application.
- It is recommended for use with the NP 05865 disc backing. It can be used with 3M® rotoorbital sanders.
SKU: AB004