Forward Dispensing
Showing 61–75 of 99 resultsSorted by price: low to high
-
Equipment: Syringe Adapter
Economical Analog Shot Meter
Jensen Global announces the latest addition to our line of dispensing equipment. The JGD300S is an economical dispenser that still gives the operator time control, to reproduce an amount of material. The timer ranges from 00.01 to approximately 30 seconds, with a vacuum pull back feature included. You can bypass the timer by dispensing in manual mode. The JGD300S has the same sleek, lightweight design as our digital JGD500S dispenser. This takes up very little workbench space without giving up any critical dispensing features.
SKU: FDJ089 -
Equipment: Shot meter
Finger Switch
Designed to be used in conjunction with any of Jensen Global’s shot meter dispensing controllers. It can be attached to any size syringe or valve, as an alternative to the electronic foot pedal. The connection to the controller can be modified for use with several other controllers on the market.
SKU: FDJ090 -
-
Equipment: Tanks
1 lb (500g) Pressure Tank
1 Lb pressure vessel, accepts a 500 gram bottle of cyanoacryalte adhesive (or other low to medium viscosity bottles of adhesive). No pouring needed; you just drop the bottle right into the tank, seal with wing nuts, and pressurize. Included an air port to pressurize the tank, and a pop-off valve set at around 60 psi for safety.
SKU: FDJ095 -
Equipment: Tanks
1 Liter Pressure Tank
1 Lb pressure vessel, accepts 1 liter bottles of adhesives (typically UV adhesives are packaged in this size). No pouring needed; you just drop the bottle right into the tank, seal with wing nuts, and pressurize. Included an air port to pressurize the tank, and a pop-off valve set at around 60 psi for safety.
SKU: FDJ096 -
Equipment: Valves
Diaphragm valve
The Diaphragm valve is designed to dispense low to medium viscosity materials and is excellent for cyanoacrylates, anaerobics, UV adhesives, and MEK. The valves stroke adjustment enables you to control the flow of material and its internal spring provides a clean shut off of material leaving no residue or dripping.
SKU: FDJ100 -
Equipment: Valves
Hand Held Pinch Tube Wand
Manual dispensing wand with a flexible silicone pinch tube and is excellent for solder masks and other flowable materials which require 50 psi or less to dispense. The pinch tube is easily replaced, therefore making clean up easy and quick. The front of the wand has a luer lock female fitting, allowing use of any size dispensing needle. Length (6.73″) Diameter (.63″)
SKU: FDJ103 -
Equipment: Valves
Needle Valve
The Needle valve is excellent for a wide range of shot sizes and materials up to 100,000cps such as adhesives, epoxies, silicones, inks and lubricants. It can be operated with the JGD500S using the internal spring to close it for low to medium viscosity materials. For higher viscosity materials, the JGD500S-DS uses air to open and close the valve
SKU: FDJ102 -
Equipment: Valves
Spool Valve
The Spool valve is designed for high pressure applications and high viscosity materials up to 300,000cps. You can control the valve with the JGD500S for low to medium viscosity materials. For dispensing heavier materials use the JGD500S-DS which uses dual actuation to open and close the valve. Suggested materials are RTV’s, silicones, greases, and solder masks.
SKU: FDJ104
