Forward Dispensing
Showing 16–30 of 99 resultsSorted by popularity
-
Equipment: Systems
UV Diaphragm Valve Dispensing System
UV Cure adhesive dispenser is designed to accept a 1 liter bottle of ultra-violet cure adhesives. There is no pouring needed (ie: you drop your 1 liter bottle of glue right into the dip-tube tank). Very little clean up is involved with this system and you do not smell the strong fumes of the glue as this is a contained system. The valve is designed to dispense thin and medium UV adhesives with precise deposits of glue with no dripping. The system has many ways to control the deposit: -needle size, tank pressure, – timer length control, -valve fine stroke adjustment.
SKU: FDJ112 -
Equipment: Systems
Solder Mask System- 4 operator
4 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ111 -
Equipment: Systems
Solder Mask System- 3 operator
3 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ110 -
Equipment: Systems
Solder Mask System- 2 operator
2 operator solder mask bulk dispenser system. You can purchase your solder mask in 1 gallon containers, pour it into the one gallon pressure vessel, and use the vessel for storage and dispensing. The pinch valve dispensing wand will accept any dispensing needle, for a specific amount of material to be dispensed. The one gallon tank has a regulator and gauge; just hook up shop air to the tank, regulate to the desired pressure for the desired flow rate (maximum of 50psi for the dispensing wand).
SKU: FDJ109 -
Equipment: Valves
Spray Valve
The Spray valve is pneumatically actuated and use air pressure to dispense low to medium viscosity materials such as lubricants, solvents, inks, and conformal coatings. You can regulate the amount of material dispensed by fine tuning the stroke adjustment knob.
SKU: FDJ105 -
Equipment: Valves
Spool Valve
The Spool valve is designed for high pressure applications and high viscosity materials up to 300,000cps. You can control the valve with the JGD500S for low to medium viscosity materials. For dispensing heavier materials use the JGD500S-DS which uses dual actuation to open and close the valve. Suggested materials are RTV’s, silicones, greases, and solder masks.
SKU: FDJ104 -
Equipment: Valves
Needle Valve
The Needle valve is excellent for a wide range of shot sizes and materials up to 100,000cps such as adhesives, epoxies, silicones, inks and lubricants. It can be operated with the JGD500S using the internal spring to close it for low to medium viscosity materials. For higher viscosity materials, the JGD500S-DS uses air to open and close the valve
SKU: FDJ102 -
Equipment: Valves
Hand Held Pinch Tube Wand
Manual dispensing wand with a flexible silicone pinch tube and is excellent for solder masks and other flowable materials which require 50 psi or less to dispense. The pinch tube is easily replaced, therefore making clean up easy and quick. The front of the wand has a luer lock female fitting, allowing use of any size dispensing needle. Length (6.73″) Diameter (.63″)
SKU: FDJ103 -
Equipment: Valves
Diaphragm valve
The Diaphragm valve is designed to dispense low to medium viscosity materials and is excellent for cyanoacrylates, anaerobics, UV adhesives, and MEK. The valves stroke adjustment enables you to control the flow of material and its internal spring provides a clean shut off of material leaving no residue or dripping.
SKU: FDJ100
