Equipment: Valves
Showing all 6 results
-
Equipment: Valves
Diaphragm valve
The Diaphragm valve is designed to dispense low to medium viscosity materials and is excellent for cyanoacrylates, anaerobics, UV adhesives, and MEK. The valves stroke adjustment enables you to control the flow of material and its internal spring provides a clean shut off of material leaving no residue or dripping.
SKU: FDJ100 -
Equipment: Valves
Hand Held Pinch Tube Wand
Manual dispensing wand with a flexible silicone pinch tube and is excellent for solder masks and other flowable materials which require 50 psi or less to dispense. The pinch tube is easily replaced, therefore making clean up easy and quick. The front of the wand has a luer lock female fitting, allowing use of any size dispensing needle. Length (6.73″) Diameter (.63″)
SKU: FDJ103 -
Equipment: Valves
Needle Valve
The Needle valve is excellent for a wide range of shot sizes and materials up to 100,000cps such as adhesives, epoxies, silicones, inks and lubricants. It can be operated with the JGD500S using the internal spring to close it for low to medium viscosity materials. For higher viscosity materials, the JGD500S-DS uses air to open and close the valve
SKU: FDJ102 -
Equipment: Valves
Spool Valve
The Spool valve is designed for high pressure applications and high viscosity materials up to 300,000cps. You can control the valve with the JGD500S for low to medium viscosity materials. For dispensing heavier materials use the JGD500S-DS which uses dual actuation to open and close the valve. Suggested materials are RTV’s, silicones, greases, and solder masks.
SKU: FDJ104 -
Equipment: Valves
Spray Valve
The Spray valve is pneumatically actuated and use air pressure to dispense low to medium viscosity materials such as lubricants, solvents, inks, and conformal coatings. You can regulate the amount of material dispensed by fine tuning the stroke adjustment knob.
SKU: FDJ105
