Abrasives
Showing 1–15 of 56 resultsSorted by price: low to high
-
Abrasives
3M™ Hookit™ Gold Film Disc
3M™ Hookit™ Gold Film Disc 255L features aluminum oxide abrasive grain on a film backing for a fast cut-rate and uniform, close-tolerance finish on wood, paint prep, and defect repair applications. Our flexible film backing provides a consistent finish and greater tear-resistance than a comparable paper product, making it well-suited for a high-production environment.
SKU: AB001 -
Abrasives
Abrasive Sponge MG 02606
The medium abrasive has a range ranging from 120 to 180 degrees. The flexible sponge tassel enables the user to sand difficult-to-reach areas such as headlight openings, around handles, door corners , etc. Helps remove finger marks and can be used wet or dry.
- Flexible sponge papers coated with abrasive material. Allow users to sand hard-to-reach areas. They help eliminate fingerprints. They can be used wet or dry.
- Allows users to sand hard-to-reach areas Helps remove fingerprints Can be used wet or dry
SKU: AB002 -
Abrasives
3M® Hookit® Gold Disc
3M® Hookit® Gold Disc, 01078, 6 “, P220A
It has 7 holes to achieve a sanding that does not produce dust. It is used for coarse edge smoothing. It can be used to perform the final step of jobs with filler. It is recommended for use with the NP 05865 disc backing.
- Non-dusting, good performance, Hookit® bonded abrasive disc.
- Finishing sanding step or rough roughing of edges before application.
- It is recommended for use with the NP 05865 disc backing. It can be used with 3M® rotoorbital sanders.
SKU: AB004 -
Abrasives
Gold Disc, 00978, P220A
Use for fine edge smoothing and final sanding prior to laying the base coat. Suggested Hookit ™ support from 3M® low profile, 6-inch 05756 or 3M® Hookit ™ backing, 6-inch 05776 and soft back, 6-inch 05774.
- Hookit ™ Good Performance Abrasive Disc
- Finishing sanding step or rough beveling before priming.
- The backing pad N / P 05865 is recommended. Can be used with 3M® Random Orbital Sanders.
SKU: AB005 -
Abrasives
Softback Sanding Sponge, 4 1/2 inch x 5 1/2 inch, Fine, 02604
M™ Softback Sanding Sponges are coated with aluminum oxide mineral. Each grade uses a range of mineral sizes. Fine ranges from grade 320 to 400.
Fine ranges from grade 320 to 400. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
SKU: AB008 -
-
-
Abrasives
File Sheet, 36 grade, 2 3/4 inches x 16 1/2 in, 00543
Green Corps™ abrasives consist of a blend of minerals that provides increased abrasive life and a faster cut rate when used on plastic filler. Green Corps™ abrasives are built on D and E weight backing to make them extremely durable for sanding paint, metal, or fiberglass. Open coat construction reduces loading on fresh filler.
Use for stripping paint to metal, rough shaping and sanding plastic filler. Use with airfile shoe 05748 or hand file 05744.SKU: AB011 -
Abrasives
3M™ Hookit™ Finishing Film Disc, 6 inch, P1500 grit, 00950
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.
Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.SKU: AB012 -
Abrasives
Purple Clean Sanding Sheet Roll
3M™ Hookit™ Purple Clean Sanding Sheet Roll, 80 grade, 70 mm x 12 m, 30713
Heavy weight backing and unique premium mineral blend make these products extremely durable. Open coat resists loading when sanding fresh body filler.
3M’s fastest cutting, longest lasting abrasive for saving labor costs and improving quality. Perforated sheet roll to easily snap desired sheet size for hand and file applications. Single product for both dust-free and non-dust-free sanding.
SKU: AB013 -
Abrasives
3M™ Purple Clean Sanding Hookit™ Disc 334U, 6 inch, P240 grit, 01814
What the power of 3M™ Purple Clean Sanding Discs can do for you:
- Extend disc life – More power to go the distance with discs that can last 2-3 times longer than traditional no-hole, 5-hole or 6-hole discs.
- Increase productivity – Longer-lasting discs improve productivity and the unique multi-hole disc pattern is designed for quicker changes because hole alignment is not required. You’ll see the difference in material consumption – and your bottom line.
- Clear out more dust with less disc loading – The spiral-patterned disc design features hundreds of holes to give dust a better escape route, moving more dust away from your finishing surface without loading the disc. Dust settles into the loops of the disc, and not in the air or on the disc surface.
- Improve cutting ability – Premium abrasives deliver consistent performance to get the job done … and done right.
- Simplify disc application – Discs utilize the 3M™ Hookit™ Attachment System for easy reuse.
SKU: AB014 -
Abrasives
Gold Disc Dust Free, P80C grit, 010833M
Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.
SKU: AB015 -
Abrasives
3M™ Hookit™ Gold Disc Dust Free 216U, 6 inch, P320 grit, 01075
3M™ Gold Abrasives are the standard that shops have turned to for quality, performance and durability for over 25 years. Our Gold Abrasives are precision coated with high quality minerals and resins to deliver longer-lasting discs that cut through a variety of surfaces – including paint, primer, fiberglass, metal and SMC. 3M™ Gold Abrasives produce uniform, consistent finishes and are available in both Stikit™ and Hookit™ options for convenience and reuse. When job quality and productivity matter most, turn to the abrasives that shops have relied on year after year.
For Featheredging and Primer Sanding (Grades 80 – 800)
These products are designed to provide productivity in a variey of applications from express repair to larger body repair. Use the coarser products for sanding and featheredging filler and putties, and the finer grades for further refinement and primer sanding. Six holes for dust-free sanding. Use for fine featheredging or the last sanding step before priming. Suggested backup pad 05856.SKU: AB016
