3M™ Purple Hookit™ File Sheet, 80 grade, 2 3/4 inches x 16 1/2 in, 01791
Uniquely blended mineral construction and tough E weight backing provides for a fast cutting, longer lasting abrasive. Excellent for stripping paint or sanding marine fairing compounds.
Uniquely blended mineral construction and tough E weight backing provides for a fast cutting, longer lasting abrasive. Excellent for stripping paint or sanding marine fairing compounds.
Related products
-
Abrasives
3M® Hookit® Gold Disc
3M® Hookit® Gold Disc, 01078, 6 “, P220A
It has 7 holes to achieve a sanding that does not produce dust. It is used for coarse edge smoothing. It can be used to perform the final step of jobs with filler. It is recommended for use with the NP 05865 disc backing.
- Non-dusting, good performance, Hookit® bonded abrasive disc.
- Finishing sanding step or rough roughing of edges before application.
- It is recommended for use with the NP 05865 disc backing. It can be used with 3M® rotoorbital sanders.
SKU: AB004 -
Abrasives
Gold Disc, 00978, P220A
Use for fine edge smoothing and final sanding prior to laying the base coat. Suggested Hookit ™ support from 3M® low profile, 6-inch 05756 or 3M® Hookit ™ backing, 6-inch 05776 and soft back, 6-inch 05774.
- Hookit ™ Good Performance Abrasive Disc
- Finishing sanding step or rough beveling before priming.
- The backing pad N / P 05865 is recommended. Can be used with 3M® Random Orbital Sanders.
SKU: AB005 -
Abrasives
3M™ Hookit™ Finishing Film Disc, 6 inch, P1500 grit, 00950
High performance Aluminum Oxide cuts fast, lasts a long time, resists loading and leaves a consistent finish. Use these products with a soft interface pad to scuff sand before painting. Use them to remove runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing. Discs are easy to remove from backup pads. They are faster and easier to use than scuffing pads, and there’s none of the dry time you get with wet sanding. Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.
Use to level minor dust nibs and for light sanding of mismatched orange peel on all automotive paints. Suggested backup pad 05776 and Interface pad 05774.SKU: AB012 -
Abrasives
Abrasive Sponge MG 02606
The medium abrasive has a range ranging from 120 to 180 degrees. The flexible sponge tassel enables the user to sand difficult-to-reach areas such as headlight openings, around handles, door corners , etc. Helps remove finger marks and can be used wet or dry.
- Flexible sponge papers coated with abrasive material. Allow users to sand hard-to-reach areas. They help eliminate fingerprints. They can be used wet or dry.
- Allows users to sand hard-to-reach areas Helps remove fingerprints Can be used wet or dry
SKU: AB002
