KB0614 Instant Adhesive
Quick Overview
KRYLEX® KB0614 Instant Adhesive is a low viscosity ethyl cyanoacrylate adhesive. KB0614 is formulated for high speed, high strength bonding of plastics, rubbers and other common substrates.
KRYLEX® KB0614 is specially formulated to give enhanced bonds on most common plastics and rubbers, but will also bond other substrates. Recommended for use on close-fitting parts and smooth, even surfaces. Can be post-applied to pre-assembled parts.
Descripción
KRYLEX® KB0614 Instant Adhesive is a low viscosity ethyl cyanoacrylate adhesive. KB0614 is formulated for high speed, high strength bonding of plastics, rubbers and other common substrates.
Typical Applications
KRYLEX® KB0614 is specially formulated to give enhanced bonds on most common plastics and rubbers, but will also bond other substrates. Recommended for use on close-fitting parts and smooth, even surfaces. Can be post-applied to pre-assembled parts.
Specification
| Chemical type | Ethyl-2-cyanoacrylate | |
| Appearance | Clear liquid | |
| Specific Gravity | 1.06 | |
| Viscosity# | cPs | 17 – 24 |
| Typical Value | cPs | 20 |
| Tensile Strength* | N/mm2 | 20 |
| Fixture Time | Seconds | 2 – 20 |
| Full Cure | Hours | 24 |
| Flash Point | °C | > 85 |
| Shelf Life @ 5°C | Months | 12 |
| Max Gap Fill | mm | 0.10 |
| Temperature Range (Continuous) | °C | -50 to +80 |
# = Cone and Plate Rheometer, controlled stress * = ISO 6922
Curing Performance
Typical Speed:
Steel/steel <20 seconds
ABS/ABS <10 seconds
Rubber/Rubber <5 seconds